I don’t have any of my radio repair equipment at the house, so I couldn’t do much with the radio besides download a “pdf” copy of the maintenance manual, read what others have said online about the radio, and complete a visual inspection of the radio.
The manual is a typical military manual with *EVERYTHING* that could ever be needed included in the text and illustrations.
Nearly all of the people posting online about the radio agreed in saying this radio was very reliable, very well built and had few “gotcha” issues.
So, it was time for the visual inspection.
The covers on the radio were all there, as were *all* (probably 25, but I didn’t count them) of the 4-40 screws with the internal tooth lock washers that secure the covers in place. According to the online posts, the covers are often missing.
The fungus resistant coating on the wiring bundles and components appears to be undisturbed nor did I notice any “period incorrect” components. This leads me to believe that the radio’s wiring is undisturbed. Undocumented modifications can make it very difficult to fix a failed radio, so no disturbances to the wiring and components is good.
On the screw adjustments is a red insulating varnish that looks like red fingernail polish. This is “Glyptal 1202” and is made by Glyptal (Corporation). In this radio, the “stuff” is used to prevent vibration from affecting the adjustment points. If something is deliberately changed with a screwdriver, the varnish flakes away. None of the adjustments appear to be disturbed. This is good. I suppose it is possible that someone reapplied the product, but in my experience, most people don’t bother to “repaint” screw adjustments that they have moved.
The only possible problem that I could see is the rectifier tube, is missing. 99% of the radio operates on DC power and the rectifier tube is what converts the AC power to DC power. Without it, there is no DC power anywhere within the radio. Sometimes people will wire solid state diodes under chassis to replace the tube and then remove the tube. This was not the case here, so the tube could have been removed for use in another project, or it could have been removed after an electrical fault damaged the tube and the prior owner never bothered to fix the problem. When I get my shop set up again, I’ll be able to check for anything that could have damaged the tube and, if needed, fix whatever might have failed.
If I get impatient, I’ll go over and use my friend’s (Test Daughter‘s father) shop.
Since I have very weak self-control, I’ll very likely end up in my friend’s house.